220V Lithium-Ion Online UPS 1-10KVA Factory Supply in China - High Frequency Solutions for Critical Loads
Key Features
High frequency on-line double conversion
Output power factor 1.0
Three level inverter topology, supports with extensive range of load
DSP (Digital signal processors) control
Active input power factor correction，input power factor > 0.99
Long battery lifecycle, more than 2000
Generator compatible
Cold start & Economic operation mode (ECO)
Wide input voltage range 90V~300V and frequency range 40~70Hz
50Hz/60Hz Frequency auto sensing
Frequency converter mode: 50Hz input / 60Hz output or 60Hz input / 50Hz output
Li-ion battery provide up to 3x backup time, comparing with regular Lead-acid UPS product
Dry contact interface for BMS dominant control
Incorporated MODBUS (RS485) interface with BMS to achieve precise battery information (voltage/soc/soh etc.)
Li-ion Battery Charger : Constant current , constant voltage, floating, turn-off 4 state charger for Li-ion battery, open to customize the logical behavior for customer- specified battery pack
Specification
| Accept Deeply Customized Products | ||
| Tower Model | Nova 6KL-Li | Nova 10KL-Li |
| Rack Model | Nova 6KRL-Li | Nova 10KRL-Li |
| Capacity | 6KVA/6KW | 10KVA/10KW |
| AC INPUT | ||
| Input System | Single phase (L/N+PE) | |
| Nominal Voltage | 208/220/230/240VAC | |
| Frequency | 50/60Hz | |
| Voltage Range | 90~300VAC | |
| Frequency Range | （40~70)±0.5Hz | |
| Input Power Factor | >0.99 | |
| BATTERY INPUT | ||
| Rated Battery Voltage | 51.2/48VDC(default for 16cell of LiFePO4) | |
| Battery Capacity | External | |
| Charger Behavior & Protection | CC. CV. floating. turn-off 4 states 3 over voltage protection loop, preserve interface for over temperature/over pressure switch off interface |
|
| Charging Current | 30A | |
| AC OUTPUT | ||
| Output Wiring System | Single phase (L/N+PE) | |
| Inverter Output Voltage | 208/220/230/240VAC±1% | |
| Waveform | Pure sine wave | |
| Power Factor | 1.0 | |
| Harmonic Distortion | THD<2% (linear load) ; THD<7% (non-linear load) | |
| Output Frequency | 50/60±4Hz(Synchronized range); 50/60Hz±0.1(Battery mode) | |
| Overload Capability | 100%~105% continuous; 60Sec.@105%~130% rated load; 10Sec.@130%~150% rated load; 0.3Sec.@>150% rated load. |
|
| Transfer Time | Line mode <-> Battery mode : 0ms | |
| EFFICIENCY | ||
| Line Mode | >92% | >93% |
| Battery Mode | >90% | |
| ECO Mode | 97% | |
| OTHERS | ||
| Standards Communication | (1) RS232 port / USB port (2) Dry contact interface for BMS control (3) Modbus For BMS interface |
|
| Optional | (4) NetWork Card: Support SNMP/TCP/IP for remote monitoring the UPS via Smart Phone APP, Web page, PC Monitor Software , Support Server / NAS shutdown (5) RS485-Modbus Card, LAN (TCP IP)-Modbus Card (6) Mini AS400 Relay Card (7) SNMP card |
|
| Alarm Function | AC/DC input under abnormal, overload condition and inverter problems | |
| Protection Function | AC input or output above or below the range of voltage, overload, over temperature and short circuit protection | |
| ENVIRONMENT | ||
| Temperature Range | -10~50oC | |
| Relative Humidity | 0-98%（Non-condensing） | |
| Acoustics Noise | <55dB @ 1 meters | |
| PHYSICAL | ||
| Tower Dimension WxDxH (mm) |
190x378x318 | 190x546x340 |
| Rack Dimension WxDxH (mm) |
440x500x88(2U) | 440x500x88(2U) |
| Tower N.W (kg) | 14.8 | 16 |
| Rack N.W (kg) | 11.5 | 13.5 |
Product specifications are subject to change without prior notice
Ambient temperature>30°C, output power factor is 0.9
Model with"L" mean long back up time model, without "L" mean standard model
Production images
Production and shipment
Production and shipment
Production and shipment
Production and shipment
Production and shipment
Production and shipment
Production and shipment
Production and shipment
Product packaging
FAQ
1. What kinds of payment methods do you accept?
- Usually 30% deposit in advance, 70% balance before shipment. Other payment methods please contact sales.
2. What’s your price and MOQ?
- Our comprehensive cost performance ratio is the best in UPS power industry, MOQ is flexible.
3. What is the input voltage range for your UPS systems?
- Our UPS systems support two types of input voltage range. 55~145V for 120V models and 90~300V for 220V models.
4. Can the UPS be used with a generator?
- Yes, our UPS systems are compatible with most generators, but it's recommended to check the generator's output stability.
5. What is the typical battery life of your UPS units?
- The battery life typically ranges from 3 to 5 years, depending on usage and environmental conditions.
6. How long does the UPS provide backup power?
- Backup time varies by model and load. Standard one with internal batteries only support few minutes, and Long backup time one with external batteries can support few hours.
010203040506